- Description
-
Details
Assioma or BePro 9mm socket.
The only difficult bit about swapping the bearings on your Assioma or BePro Favero pedals can be getting hold of a 9mm socket small anough to fit into the recess to undo the locknut.
This socket is 9mm and has a 1/4" drive to use with a socket set or torque wrench.
Remember that the end cap on both pedals has a normal thread. The locknut on the left pedal has a normal thread however the locknut on the drive side pedal is reverse threaded so you undo it clockwise and do it up anticlockwise.
The locknut should be done up to 8-10Nm
The End cap should be done up to 2-3 Nm
- Additional Information
-
Additional Information
Brand Favero Mask Size N/A - Reviews
-