Assioma Spares
-
£5.00
Assioma or BePro 9mm socket.
The only difficult bit about swapping the bearings on your Assioma or BePro Favero pedals can be getting hold of a 9mm socket small anough to fit into the recess to undo the locknut.
This socket is 9mm and has a 1/4" drive to use with a socket set or torque wrench.
Remember that the end cap on both pedals has a normal thread. The locknut on the left pedal has a normal thread however the locknut on the drive side pedal is reverse threaded so you undo it clockwise and do it up anticlockwise.
The locknut should be done up to 8-10Nm
The End cap should be done up to 2-3 Nm
Learn More -
£65.00
Enduro sealed ABEC3 Bearings, M6 hex nuts, oil-seal and endcap set for Favero Assioma pedal body.
This kit contains the bearings for both pedals.
Kit includes:
pedal washers
bearings
end caps
spacers
lock nutsIf you choose for us to install them then use your order number as your reference and ship your pedals to: Cyclepowermeters 18 Arches Business Centre, Mill Road, Rugby, CV21 1QW
Learn More
Caution - using non standard bearing may void your warranty -
£65.00
Are your Assioma bearings starting to fail.? If you ship them to us we can install new bearings. The price for this including labour and parts is 65 pounds.
We can also check the accuracy of your pedals with known weights for an additional charge
Learn More -
£49.95
Replacement cartridge for Assioma Duo Shi
Learn More
This will not work with standard Assioma Duo axles and cannot be used to convert LOOK Keo versions to Shimano SPD-SL as the axles are different -
£35.00
Bearings, M6 hex nuts, oil-seal and endcap set for Favero Assioma pedal body.
This kit contains the bearings for both pedals.
Learn More -
£54.95
LEFT PEDAL BODY FOR ASSIOMA
Cod. 772-60
Replacement of the Assioma LEFT pedal body. Including bearings, M6 nuts, oil-seal and end-cap.
This pedal body has an extended release torque range (8-20Nm) and the springs in black color.
-
£54.95
RIGHT PEDAL BODY FOR ASSIOMA
Cod. 772-61
Replacement of the Assioma RIGHT pedal body. Including bearings, M6 nuts, oil-seal and end-cap.
This pedal body has an extended release torque range (8-20Nm) and the springs in black color.
-
£310.00Replacement of the LEFT pedal axle with sensor for Assioma DUO. Attention: this item is compatible only with the corresponding Assioma pedal body. Learn More
-
£310.00Replacement of the RIGHT pedal axle with sensor for Assioma DUO. Attention: this item is compatible only with the corresponding Assioma pedal body. Learn More
-
£85.00Replacement of the right pedal WITHOUT sensor for Assioma, ready to be installed. 2 washers for fixing included. Learn More